![]() ![]() |
Nuloc 2 Fastener Set for Composite Tuff N Lite 2 Posts
![]()
Part #:
SIGNPOSTTUFFTWOFASTENERKIT
Our Price:
$0.75
Shipping Weight:
0.05
pounds
Nuloc 2 fasteners are a rust free fastener option for your tuff n lite 2 posts. Easy to use - no tools required. Will not vibrate loose. Components are fastened by first, sliding the nylon clip onto the stem, by means of the keyway, to the desired position. Second, rotate the nylon clip clockwise to tighten and to secure the locking tabs in place. The nylon clips will not rotate 360 degrees since the threads are blocked on one side of the keyway. To remove the plastic fastener, simply rotate the nylon clip counterclockwise which disengages the locking tabs. Continue rotating the nylon clip until it stops at the keyway and then slide the nylon clip off the stem. Or, for a permanent installation, simply cut off clip wings. Only sold with Tuff N Lite posts.
Each set contains 2 stems and 2 clips to install one sign. If you need to drill holes in your sign, Nuloc fasteners have a diameter of approximately 5/16 inches and require at least a 3/8 inch diameter hole. Most traffic signs are drilled with two 7/16 inch holes. |